The Blog

Fix a Bissell brush that won’t spin in 6 ordered steps, belt first. Covers the burning-rubber stop, the plush-carpet stall and the spins-by-hand test.

Test your Dyson V10 trigger in 60 seconds. No click = cracked switch, a 15-minute fix. Still clicks? It is hold-to-run by design. Lock-on options and costs.

Dry the filter fully: a damp Dyson V10 filter is why it won't start or pulses after cleaning. Get 6 ordered fixes, from the 24-hour rule to a reset.

Fix a Dyson brush bar that won't spin: the spins-by-hand test, hair, contacts, bearings and the broken-wire verdict, cheapest fix first.

Reset any Dyson vacuum fast: soft trigger-cycle, battery hard reset, LCD Reset Machine menu, and the lockout fix owners miss. No reset button required.

Fix a Dyson that won't turn on — cordless (V6–V15) or corded Ball. Covers the dead-vs-flickering test, battery reset, and the 30-min thermal cutout.

Fix a Dyson that won't charge: isolate charger, battery or contacts, reset the pack, clear the temperature lockout, and know when to replace it.

Stop your Dyson pulsing on and off in minutes: clean the filter (24-hr dry), clear the bin-inlet flap, then run the battery test. 5 fixes, V6–V15.

Decode every Dyson vacuum light: flashing red means battery, blue is charging, amber is temperature. Color-by-color fixes for V6–Gen5, plus the LCD icons.

Fix a Dyson with no suction in 6 airflow checks: bin, filter, wand, spring-flap, cyclone, and seals. Restore full power in 20 minutes, no new motor needed.

Fix any Dyson fault fast - V6 to V15, Ball, or robot. Use the model-by-symptom map, tell a real fault from a by-design cutout, and know when to replace.

Test if it's really the belt, match your Shark DuoClean, Rocket, Apex or Navigator model to the right belt, and fit it yourself in about 20 minutes.

Reset your Shark robot vacuum in 2 minutes - soft, factory, and without-app steps by model, plus WiFi reconnect and error-code fixes. Tested on 6 models.

Fix a Shark robot vacuum that won't charge, keeps stopping, circles, or won't dock — one cross-model guide for ION, IQ, AI and Matrix, plus an error-code decode

Fix an overheating Shark: unplug, cool it 45 minutes, then clear the clog, filters and brush roll. Burning smell? Tell a belt fault from a dying motor fast