Same? Shop Vac 90107 vs 90137 (and 2 That Aren’t)

Are Shop-Vac Filters the Same? The 30-Second Answer

You copied a number off an old filter or bag, searched shop vac 90107 vs 90137, and got a wall of retailer listings that all quietly imply the numbers are interchangeable.

For one of the three most-searched Shop-Vac pairs that is true, and for the other two it is a quietly expensive mistake.

Shop-Vac 90107 and 90137 are the same reusable dry disc filter for vacuums 5 gallons and up, and 90107 (part 9010700) is the current number.

The bag pairs are different: 90661 and 90671 are both 5 to 8 gallon bags, and 90662 and 90672 are both 10 to 14 gallon bags, but the second number in each pair is a high-efficiency fine-dust bag, not a match.

So the number on your old part tells you the size, not always the right reorder.

Three questions, three answers, in one line each:

• 90107 vs 90137: same reusable dry disc filter, reorder either (90107 is current).

• 90661 vs 90671: same 5 to 8 gallon size, different grade (90671 is the fine-dust bag).

• 90662 vs 90672: same 10 to 14 gallon size, different grade (90672 is the fine-dust bag).

According to Shop-Vac’s official filter guide, the Type letter and tank size, not the retail number, decide what actually fits your vacuum.

The Master Shop-Vac Filter and Bag Cross-Reference Chart

The Shop-Vac filter and bag cross-reference chart below maps all six part numbers plus the 90585 foam sleeve against tank size, filtration grade, and what each is actually for.

The reusable dry discs 90107 and 90137 are interchangeable, while the four bags split into standard and high-efficiency grades at two tank sizes.

Prices are left out on purpose, because they drift across retailers and dates, so verify the live cost at checkout.

This is the single grid the brand guide and the retailer listings never put in one place.

Chart last verified: August 2026. Re-checked against Shop-Vac’s own product listings; catalog numbers get superseded, so treat any row older than a year with suspicion.

How to read it: find your part number in the first column, then read across to the grade and the “best for” note.

Every row here was cross-checked against the parts on our own shelf and the Type S dry filter page, which lists 90107 and 9010700 as the same current disc.

If you are still deciding between a disposable bag and a washable filter in the first place, our bag vs filter, explained guide covers that choice on its own.

And for the wider family of cartridges, foam, and discs, the full guide to filter types breaks each one down.

How Shop-Vac Part Numbers and Type Letters Work

Shop-Vac numbers come in two forms plus a letter. There is a short catalog number like 90107, a long OEM number like 9010700 (often written 901-07-00), and a Type letter such as S, T, E, F, H, or I.

The Type letter and the tank size are what decide fitment, which is why aftermarket kits list several numbers at once.

Reusable dry discs also depend on a 90585 foam sleeve to seal properly, a detail the marketing number never tells you.

Here is the same number decoded four ways, so any figure on an old part becomes readable:

The reason two numbers can name one filter is history.

Shop-Vac superseded older catalog numbers with newer ones while retailers and aftermarket sellers kept the old figures alive on their listings.

That is also why a “compatible with 90107/90137” label on a third-party pack is a claim, not a guarantee.

Match the Type letter and your vacuum’s model, not the brand name on the box.

To find your own number, look in three places.

Check the molded stamp on the vacuum lid or tank, read the print on the old filter collar or bag, and confirm against your owner’s manual.

If you are not yet sure what a shop vac is as a category, that primer sets the groundwork.

The brand versus generic shop vac distinction matters here too, because “Shop-Vac” the brand is exactly why these Type letters exist.

Shop Vac 90107 vs 90137: The Reusable Dry Filters, Compared

Shop Vac 90107 vs 90137 is the one pair where “are they the same?” gets a clean yes.

Both are reusable dry disc filters for wet/dry vacuums 5 gallons and up, both mount over a 90585 foam sleeve, and 90107 (Type S, OEM 9010700) is the current catalog number that supersedes the older 90137 (Type T, 9013700).

The only routine difference is the mounting ring: the Type S disc usually ships with one, while the Type T often does not.

Reorder either and your vacuum will not know the difference.

What is identical is the part that matters. Same disc diameter, same pleated dry-debris media, same 5-gallon-and-up fitment, same foam-sleeve requirement.

What differs is cosmetic and minor.

The hyphenated spelling you may have searched, shop-vac 90107 vs 90137, points at the same two SKUs, and the Type S versus Type T retaining-ring detail does not change whether the disc seals.

Shop-Vac’s own listing backs the equivalence: the Type S dry filter page shows 90107 replacing a run of older numbers including 9010700, 9010708, 9010711, and 9010733.

Do not skip the foam sleeve. The disc alone will not handle wet pickup or the finest dust, because the 90585 sleeve is what seals the setup and protects the motor.

Because these discs are washable, when to clean or replace it is where the real savings live rather than in buying new ones.

The how to wash and reuse it routine keeps one disc sealing for months.

One thing not to do is run the vacuum bare. Whether running a shop vac without a filter is ever safe is its own question, and the short answer for dry dust is no.

Shop Vac 90661 vs 90671: Standard vs High-Efficiency (5–8 Gal Bags)

Shop-Vac 90661 and 90671 are both 5 to 8 gallon disposable collection bags, but they are not the same.

Shop-Vac 90661 (Type E) is the standard bag for general debris, and 90671 (Type H) is a high-efficiency bag built for fine dust like drywall, concrete, and cold ash.

The shop vac 90661 vs 90671 search usually starts because a retailer files both under one tank size, which hides the grade difference.

For sanding or drywall work choose 90671, and for general shop cleanup 90661 is enough.

The size is the trap here. Both fit the same 5 to 8 gallon vacuums, so the number you copied off the old bag looks safe to reorder even when the grade is wrong for your mess.

The difference is what the media traps. Shop-Vac’s Type E listing documents 90661 as the standard 5 to 8 gallon bag, while the Type H bag adds a finer layer for airborne dust.

Does 90671 replace 90661?

Not exactly, and that is the point: 90671 is an upgrade in filtration, not a like-for-like swap, so it fits the same vacuum but performs differently.

Use 90671 when you want the finer capture, and stay on 90661 when you are only pulling general shop debris.

Owners confirm the split in a Shop-Vac owner Q&A, where the fine-dust bag is identified as the high-efficiency option rather than a straight substitute.

Why the wrong bag bites you comes down to fine dust.

A standard bag loaded with drywall or concrete dust clogs fast, and once it clogs you get “blow-through,” a visible haze that reaches the exhaust and the motor.

The job rule is simple:

• Fine dust (drywall, plaster, concrete, cold ash, sanding): buy 90671.

• General debris (wood chips, dirt, shop sweepings): 90661 is plenty.

Do not overpay for high-efficiency you will not use. On general debris you will not notice the difference, and the standard bag costs less per pack.

Drywall and sanding dust is exactly the mess that also wants a filter setup that will not blow through, which the drywall-dust filter setup guide walks through.

Bags are job-specific because shop vacs handle so many jobs. Our roundup of 30+ shop-vac uses shows how varied that gets.

For fine dust especially, a cyclone ahead of the bag keeps suction up, which the dust-collection cyclone setups guide covers in detail.

Shop Vac 90662 vs 90672: Standard vs High-Efficiency (10–14 Gal Bags)

Shop-Vac 90662 and 90672 repeat the same standard-versus-high-efficiency split one tank size up.

Both are 10 to 14 gallon disposable collection bags, but 90662 (Type F) is the standard bag and 90672 (Type I) is the high-efficiency fine-dust bag for drywall, cement, and cold ash.

The shop vac 90662 vs 90672 question is really the same question as the smaller pair, so the buying logic carries straight over.

Pick 90672 for fine dust and 90662 for everyday debris.

The grade difference is documented on the brand’s own pages. Shop-Vac’s Type F page lists 90662 as the standard 10 to 14 gallon bag.

Its Type I high-efficiency page covers 90672 as the fine-dust option for the same tanks. Same size band, different capture.

Check fitment before you assume. These bags need a tank-inlet 10 to 14 gallon vacuum, so confirm your model is in that band rather than a smaller or wall-mount unit.

If you are unsure which gallon size you need in the first place, that selector sorts it out quickly.

Gallon tiers interact with horsepower and airflow too, which how shop-vac sizes work explains for the whole range.

For heavy, all-day fine-dust work, some readers are honestly better served by a dedicated tool than by any bag, and the shop vac vs dust extractor comparison lays out when to make that jump.

Which Shop-Vac Filter Should You Actually Buy?

The right Shop-Vac filter is chosen by the mess and the tank size, not by the number on the old part.

For general shop debris, a standard bag or the 90107 reusable disc handles it. For fine dust like drywall or concrete, reach for the high-efficiency bag (90671 or 90672) and, ideally, run the reusable disc behind it.

For water, use the 90585 foam sleeve alone with no paper bag. That single decision, mess first, turns the whole SKU maze into one clear pick.

Our standard setup for a drywall day is a high-efficiency bag plus the reusable disc plus a cyclone bucket ahead of the vacuum, and with that stack the disc stayed clean for weeks instead of clogging in an afternoon.

The cyclone drops the heavy dust before it ever reaches the filter, which is why a finer filter survives.

Running a bag and a filter together is not overkill for fine dust, it is the point. The bag catches the bulk, the disc backs it up, and the motor stays clean.

A bag will never do wet pickup. For water, pull the bag, fit the foam sleeve only, and skip the paper entirely.

If you are still weighing whether a shop vac even beats your household machine for a given job, that is a separate call covered in shop vac vs a regular vacuum.

Brand matters more for the vacuum itself than for these filters, which which shop-vac brand wins gets into.

And no filter turns a shop vac into a deep-cleaner, so shop vac vs a carpet cleaner is worth a look before you buy the wrong tool.

Frequently Asked Questions

Shop-Vac’s part-number system generates the same handful of questions over and over, and the answers below resolve each one against the brand’s own listings.

The question we field most from our own readers is the plainest one: the number on my old bag is X, so what do I reorder?

Is 90107 the same as 90137?

Yes. Shop-Vac 90107 (Type S) and 90137 (Type T) are the same reusable dry disc filter for wet/dry vacuums 5 gallons and up, and 90107 is the current catalog number. The only routine difference is that the Type S usually ships with a mounting ring. Both require a 90585 foam sleeve.

What is the difference between 90661 and 90671?

Both are 5 to 8 gallon disposable collection bags, but they are not interchangeable. Shop-Vac 90661 (Type E) is the standard bag for general debris, while 90671 (Type H) is a high-efficiency bag built for fine dust like drywall, concrete, and cold ash. Buy 90671 for sanding work.

Do I need the foam sleeve with the dry filter?

Yes. A Shop-Vac reusable dry disc, whether it is labeled 90107 or 90137, is designed to sit over a 90585 foam sleeve. The disc catches dry debris while the foam handles wet pickup and shields the motor. Running the disc alone leaves gaps that let dust and water slip through.

Which Shop-Vac bag is for drywall dust?

For drywall, plaster, and concrete dust, choose the high-efficiency bag: 90671 (Type H) in a 5 to 8 gallon vac, or 90672 (Type I) in a 10 to 14 gallon vac. The standard bags, 90661 and 90662, clog quickly on fine dust and let a haze blow through to the exhaust.

How do I find my Shop-Vac’s filter number?

Check the molded stamp on the vacuum lid or tank, read the print on your old filter or bag, or open your owner’s manual, then match the Type letter rather than the marketing number. Confirm that number against your model before ordering, because aftermarket “compatible with” claims do not always match the real fit.